Introductory Report - 25%

1. A 3 page report outlining the project and aims
   

2. Deadline for Submission:  Thursday 12 November, 2009 (noon)
   

Dissertation (Final Report) - 35%

1. A 7-10k word report detailing activities during the placement
   

2. Deadline for Submission:   Wednesday 1 September, 2010 (noon)
   

Oral Presentation - 15%

1. A 15 minute presentation summarising the placement activities
   

2. Deadline: to be arranged with each student and Industrial supervisor
   

Performance/Log Book - 25%

1. Based on log book activities and discussion with Industrial supervisor
   

2. Deadline for Submission:  at the Oral Presentation
   

For more details, email T.R.Payne@liverpool.ac.uk

The dissertation provides a full, and critical account of your industrial placement, and forms the most significant contribution towards your final grade. The format of the dissertation can vary, depending on the type of placement you had; some placements focus on a single problem or task that can be written up, whereas other placements may consist of several tasks, one of which should be described.  Though similar to a final year honours project report, the dissertation should also include an account of the industrial experience, describing not only the professional issues you encountered, but a reflective account on what was learned and gained from being in industry.

The dissertation should be submitted electronically as a single pdf file through the Departmental Coursework Submission Site for G402.  This deadline is firm, and no extensions will be granted.  The dissertation will be marked by two members of academic staff (including your academic supervisor), and should be self contained (assume that the staff members have no prior knowledge of your activities within industry).  A target size of 7,000 words is recommended, with a maximum of 10,000 words (this is similar to a target of about 30-40 A4 pages using a 12pt type). Appendices will not be included in the maximum, but examiners will not normally expect to read appendices in detail, so they are intended to supply supporting and illustrative material.

The submission URL is: https://cgi.csc.liv.ac.uk/cgi-bin/submit.pl?module=G402

The content of the dissertation is at the discretion of the student, and will depend on the nature of the placement.  If the placement comprised a single task or problem, then this should be the focus of the dissertation.  However, for many placements, the student may be involved in several major tasks.  If this is the case, then each of the tasks should be summarised (typically in 1-2 pages), before selecting one which will be presented in more detail.  A justification and motivation should be given for this selection.

The following structure provides an indication of what would be expected in a typical dissertation:

1. •ABSTRACT: a summary (no longer than 400 words) of the placement as a whole.
   

2. •INTRODUCTION: This will give a brief overview of the placement activities, what problems were addressed, challenges encountered and solutions produced.
   

3. •PLACEMENT TASKS AND MOTIVATION: Provide a list of each of the major tasks that you undertook as part of the placement.  Then select one to be the main focus of the dissertation, and provide a motivation for selecting that task.  Note that if only one task was conducted, then this section is not necessary.
   

4. •RELATED LITERATURE: Any reading or research conducted to acquire the necessary information and skills to carry out the main task.
   

5. •DESIGN: Full detail of the design of the software developed as part of the main task. All design documentation should be supplied (possibly as an appendix).  If the main task is similar to that described in the original specification (submitted in November,  2009), then any deviations of the final design from that specification should be discussed.
   

6. •REALISATION: Details of the implementation, including tools, language, and environment.  Discuss the challenges encountered during the implementation, and in particular, what professional issues were considered. Also, discuss how the work was evaluated or tested; what testing approaches were used.  If the software was tested by third parties, describe how the bug reports were managed, and how this led to new versions of the software.
   

7. •REFLECTION: Provide a critical appreciation of the strengths and weakness of the work, and how it was conducted. This may include, where appropriate, customer feedback.
   

8. •PROFESSIONAL ISSUES: Discuss other industrial experiences and lessons gained from your experience within industry.  Try to relate your experiences with the British Computer Society Code of Conduct and Code of Good Practice.
   

9. •CONCLUSIONS: Summary, main findings, and further work (if relevant).
   

10. •BIBLIOGRAPHY: A properly cited list of books, articles and other materials consulted during the placement and/or referred to in the dissertation.
    

11. •APPENDICES: Appendices are meant to contain detailed material, required for completeness, but which are too detailed to include in the main body of the text. Typically they might contain a full code listing (where permissible), details of test data, screen shots of sample runs, a user guide, and full design diagrams, and similar material. One Appendix should summarise key activities throughout the placement, which will list important dates such as completion of major stages, release of versions of the software, review meetings and other quality assurance activities.
    

For your guidance, a copy of the feedback and mark forms that will be used to assess your dissertation are available online.

Dissertation - 35%

Deadline: September 1st, 2010 at 12 noon

archive

Assessments and Deadlines

The oral presentation is intended to give an overview of what has been achieved during the placement. The student should present an overview of the activities, and details of one of the major tasks of the placement. The oral presentation is expected to take place during the last month of the placement; typically during August. One copy of the slides must be provided to the markers prior to the presentation (although this can be on the day of the presentation itself).  The presentation will last 15 minutes, plus questions.

The focus of the oral presentation will depend on the nature of the placement, but should detail the major task that is described within the dissertation.  Normally, the presentation will include:

1. •The aims of the task.
   

2. •A summary of the design.
   

3. •A description of what was produced in the task.
   

4. •Any interesting aspects of the implementation (when appropriate).
   

5. •A discussion of any challenges that were encountered, and how they were overcome.
   

6. •An evaluation of what has been achieved.
   

7. •A reflection of what was learned or gained from the placement
   

The presentation will be assessed by one academic staff member and the Industrial Supervisor.  A grade will be given which will count for 15% of the final mark, and this will be made available within five days of the presentation.  For your guidance, a copy of the feedback and mark forms that will be used to assess your oral presentation are available online.

Oral Presentation - 15%

Deadline: to be arranged with each student and Industrial supervisor

The performance and conduct of the student in the placement will be evaluated based on the Industrial Supervisor’s experience and the details provided in the log book.  This will be based on discussions between the academic supervisor and Industrial Supervisor.  This grade will count for 20% of the final mark, and this will be made available at the end of the placement.  For your guidance, a copy of the forms that will be used to assess your performance are available online.

Performance/Log Book - 25%

Deadline: at the oral presentation

Announcements